HP wireless printer setup and Guide
When you just bought a wireless HP printer, then setting it up to wireless network is necessary to start print job, fax or scan the document from your associated PC. After establishing a wireless connection on your printer and computer to the same network, then you will be allowed to print without any hassle. So, if you are looking for HP Wireless Printer Setup, don’t worry! You are at right place. This content is only for HP wireless printers connecting to a wireless network. Therefore, feast your eyes over here and learn the entire working procedure of printer setup.
Desired Procedures to Do for HP Wireless Printer Setup
Follow the steps accordingly to Connect Hp
Printer to wireless network and then print a document in a hands-free
manner. Have a glimpse at noted points instead of wandering:
Procedure 1: Connect Your HP Wireless Printer with a Touchscreen Control Panel
What you should actually do is to access the
Wireless Setup Wizard using the printer control panel to establish a wireless
connection between your printer and your computer to the same wireless network.
Here is the step you need to follow:
1.
Go to the home screen of your printer control panel and from there
touch the Wireless icon.
2.
Next, tap the setup icon
3.
And then select the option “Restore Network Defaults” or “Restore
Network Settings” and touch “Yes” to confirm your selection
4.
After restoration of the default network settings you need to
touch the back arrow, press the “Wireless Settings” button, and then tap on
“Wireless Setup Wizard” tab
5.
The printer start searching for the networks that are available
6.
Once you find your network, give a click on the name of your
wireless network
7.
If your wireless network is not listed into the wireless network
menu, hit “Enter New Network Name”, and then type the name of your wireless
network
8.
Type the WEP or WPA key (network password), and then click “Done”
9.
If you don’t remember your network password, go to Find Your
Wireless WEP, WPA, WPA2 Password
10.
Once you enter the password correctly, the printer finally gets
connected to the wireless network. And when the connection establishes, the
blue Wireless light on the control panel turns on solid
If the printer fails to connect,
print a Wireless Network Test Report, and then follow the prompts mentioned on
the report exactly in the same way to troubleshoot wireless connectivity
problems.
Procedure 2: Connect Your Wireless Printer That Doesn’t Have Touchscreen Control Panel
You are required to use Wi-Fi Protected
Setup (WPS), HP Smart, or temporarily connect a USB cable to making a wireless
connection between your printer and your computer with the wireless network.
Following are the advices you should go through to establish connection on your
printer that doesn’t have touchscreen control panel:
Step 1: Connect Your HP Wireless Printer with WPS
In the very first step, you need to
use WPS for making connection to the wireless network. Check-out the list noted
below to know how to use WPS for connecting the wireless device:
1.
First pinpoint the WPS button on your router, but do not press it
2.
In case your router does not support WPS, then jump to the next
step that is to connect the printer with the HP Smart app
3.
Now, turn your printer ON if it is not already active. Go to the
Control Panel section and touch the “Cancel” button if your printer is in Sleep
Mode
4.
On the printer control panel, press and hold the Wi-Fi button for
a couple of seconds or press it until the wireless light starts blinking
5.
On the router, press and hold the WPS button for at least 3-4
seconds or until it informs that the WPS connection process has started
After performing such things in an
appropriate manner, your wireless HP Printer will get connected to the wireless
network. And once it connects the blue Wireless light on the control panel
turns on solid. But, if the wireless network connection fails to establish,
continue to the next step.
Step 2: Connect Your HP Printer with HP Smart App
You simply need to use the HP Smart
app to connect the printer to your wireless network. Here is the process to do
it, so have a glance at once:
1.
First ensure that your PC is connected to your wireless network
2.
Now, download and install HP Smart
App from the Microsoft Store on your computer
3.
Next, turn- ON your printer. If the printer is in sleep mode,
simply press the “Cancel” button
4.
Prepare the printer for a wireless network connection
5.
Now, launch HP Smart app on your computer, and then tap the
“Printer” icon
6.
Click “Set Up a New Printer”, and then press “Continue” button
7.
HP Smart application will start searching for the printer that is
on your wireless network
8.
Choose your printer from the list, and hit “Continue”
9.
When prompted, type the WEP or WPA key
10.
If you do not remember your network password, go to Find Your
Wireless WEP, WPA, WPA2 Password
11.
Once the printer connects successfully to your wireless network,
click Continue, and then tap Exit Setup
Step 3: Connect the Printer with the USB Cable
Use a USB cable to connect your
printer to wireless network. To do so, follow the given points:
1.
First, you need to search Windows for HP, and then select the name
of your printer from the list
2.
Touch the “Utilities” tab
3.
Click Printer Setup & Software, and then press the button
“Reconfigure Wireless Settings”
4.
Follow the on-screen prompted instructions to change the wireless
settings
5.
When prompted, connect the USB cable and type the WEP or WPA key
or your network password.
Dial Printer Helpline
Number for HP Wireless Printer Setup
If you are still unable to do HP Wireless Printer Setup and
yet the printer doesn’t connect to the wireless network, then place a single
call at HP Printers warranty
helpline number1-800-673-8163. The
highly experienced tech-specialists team is working here round the clock to
sort out your problem whatever you are getting with your wireless HP Printer
device. So, feel free to contact them and get one-stop direction to setup HP
printer.
Comments
Post a Comment